FIRE COMPANIES IN DUBAI

An addressable fire alarm system is one in which all fire and smoke detection devices in a system are connected and communicate both with each other and a central control monitoring location.

A conventional fire alarm system uses one or more circuits, connected to sensors wired in parallel. Each device is connected to the control panel with its own wire. 

Fire alarm voice evacuation system uses speakers and amplifiers to notify occupants with an alarm tone followed by a voice instead of the traditional horn or bell. Also provides ability for live voice announcements by the fire department or emergency personnel through a local paging microphone.

An optical beam smoke detector is a device that uses a projected beam of light to detect smoke across large areas, typically as an indicator of fire. They are used to detect fires in buildings where standard point smoke detectors would either be uneconomical or restricted for use by the height of the building.

Air sampling smoke detectors are a highly effective and helpful way to safeguard your business from fire hazards. The first step to understanding the pros and cons of these fire detector systems is to know how they are different from other detector systems. Air sampling systems are triggered by air, as the name suggests, which is much different from your usual systems that detect fire through heat or a smoke.(VESDA)

Heat detectors are intended to minimize property damage by reacting to the change in temperature caused by a fire. Smoke detectors are intended to protect people and property by generating an alarm earlier in the development of a fire.

Manual Call Point is a device for the manual initiation of an alarm. Manual fire alarm activation is typically achieved through the use of a  call point  which then sounds the evacuation alarm for the relevant building or zone.

Control Modules are used to Control third party inter-facings like Elevators, Access Doors, HVAC systems, etc,. in case of an Alarm in FACP. Monitoring Module is input which gives signal and Control Module is output module to generate the horn or sound bells

A fire alarm notification appliance is an active fire protection component of a fire alarm system. A notification appliance may use audible, visible, or other stimuli to alert the occupants of a fire or other emergency condition requiring action.

LED remote indicator is an attractive device used in installations where a detector going to alarm is likely to occur behind a locked door, inaccessible rooms, or in a ceiling void to provide indication of the activation of a fire detector.

A fire alarm control panel (FACP), fire alarm control unit (FACU), or simply fire alarm panel is the controlling component of a fire alarm system. The panel receives information from devices designed to detect and report fires,  The panel may also supply electrical energy to operate any associated initiating device, notification appliance, control, transmitter, or relay. There are four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems.

Wireless System are used as part of an addressable fire alarm system to detect smoke, CO2 or heat in a building or other premises as an early warning of fire. Wireless detectors communicate through radio signals with each wireless detector having a unique address that it communicates to the addressable fire panel.